Note: Page takes a loooong time to load, lots of pictures
   Home  |  About Us  |  Search  |  Contact Us  |  FAQs  | Products  |  Warranties  |  Customer Service
 Factory Five 33 kit cars  -  33 Ford Roadster


click here for mustang main page ||||click here for Cobra Mustang 1994-2004
33 Ford roadsters custom powder coated by discbrakesrus
  IF YOUR LOOKING FOR A REAR END TO MATCH YOUR PAINT JOB PLEASE GIVE US A CALL 888 558 5757
We Powder coated This car for Factory Five the Frame,The Rear end,& the supension parts plus built the rear end.
 
 
 
AXLE KITS
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR REAR AXLES
AXLES
Click Here 1979-1994 Fox axles
AXLE SPACERS
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR REAR AXLES SPACERS
AXLES SPACERS
Click Here 1979-1994 Fox axles SPACERS
Assembly Fluid
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR Caliper & Master cylinder assembly fluid
Assembly Fluid
Click Here For Assembly Fluid
IRS TBIRD CV AXLES
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR IRS REAR CV AXLES
IRS REAR AXLES
Click Here For IRS CV AXLES
IRS AXLE KIT
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR IRS AXLE assemblie KIT
IRS AXLE KIT
Click Here For IRS AXLE KIT
8.8 STRAIGHT REAR END FOR 28 TOOTH AXLES
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR 8.8 STRAIGHT REAR END for 28 tooth axles
8.8 straight Rear End
Click Here 1979-1996 8.8 Straight rear end
8.8 IRS COMPLETE REAR END
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR IRS 8.8 REAR END
IRS REAR END
Click Here 1987-1996 IRS rear end
BANJO BOLTS
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR BANJO BOLTS
BANJO BOLTS
Click Here For banjo bolts
(BOLTS) CALIPER MOUNTING BOLTS FRONT WHEELS
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR (BOLTS FRONT) CALIPER FRONT WHEEL MOUNTING BOLTS
MOUNTING BOLTS FRONT CALIPERS
Click Here For Caliper front wheel mounting bolts
(BOLTS REAR) CALIPER MOUNTING BOLTS REAR WHEELS
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR (BOLTS) CALIPER REAR WHEEL MOUNTING BOLTS
CALIPER REAR WHEEL MOUNTING BOLTS
Click Here For Rear Wheel Caliper mounting Bolts
Brake line clips
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR Brake line clips
Brake line mounting clips for s/s or rubber lines
Click Here For Brake line clips
Brake line brackets
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR Brake line brackets
Brake line mounting brackets for brake lines
Click Here For BRAKE LINE BRACKETS
BRAKE LINES S/S
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR S/S BRAKE LINES
S/S BRAKE LINES
Click Here For S/S BRAKE LINES
Brake Caliper brackets Front Mustang Cobra
Back to Top
  Caliper bracket for PBR Cobra two piston Fronts
1994-2004
Click Here For Caliper Brackets Front
REAR BRACKETS 8.8 STRAIGHT REAR ENDS AND IRS REAR ENDS
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR CALIPER BRACKETS FOR IRS AND 8.8 STRAIGHT REAR ENDS
IRS BRACKETS AND 4LUG AND 5LUG
Click Here For IRS REAR BRACKETS AND 5LUG AND 4LUG
DRILL BITS
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR DRILL BITS
DRILL BITS
Click Here For Drill Bits
Boot and seals
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR Boot and seals
Boot and seals
Click Here For Boot and seals
Brake Bleeder screw and bleeder repair kits
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR Brake Bleeders
Brake Bleeders and Bleeder repair kits
Click Here For Brake Bleeders
BRAKE FITTINGS
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR BRAKE FITTINGS
BRAKE FITTINGS
Click Here For Brake FITTINGS
BRAKE FLUID
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR BRAKE FLUID
BRAKE FLUID
Click Here For Brake Fluid
FRONT BRAKE ROTORS
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR FRONT BRAKE ROTORS
FRONT BRAKE ROTORS
Click Here For FRONT BRAKE ROTORS
REAR BRAKE ROTORS
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR REAR BRAKE ROTORS
REAR BRAKE ROTORS
Click Here For REAR BRAKE ROTORS
BRAKES TOOLS
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR BRAKE TOOLS
BRAKE TOOLS
Click Here For BRAKE TOOLS
COBRA MUSTANG 1994-2004 TWO PISTON CALIPERS
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR CALIPERS ONLY WITH TWO PISTONS
CALIPERS TWO PISTON COBRA FOR 17 INCH WHEELS
Click Here For TWO PISTON CALIPERS ONLY
GT MUSTANG 1999-2004 TWO PISTON CALIPERS
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR CALIPERS GT ONLY WITH TWO PISTONS
CALIPERS GT TWO PISTON FOR 15 INCH WHEELS
Click Here For TWO PISTON GT CALIPERS ONLY
Gt-PBR CALIPERS KIT FRONT WHEELS WITH 11 INCH ROTORS (for 15 inch rims)
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR Gt-PBR CALIPERS KIT FRONT WHEELS WITH 11 INCH ROTORS
Gt-PBR CALIPERS KIT WITH 11 INCH ROTORS
Click Here For CALIPER KITS FRONT WHEEL ONLY GT TWO PISTON
COBRA KIT FRONT WHEELS WITH 13 INCH ROTORS
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR COBRA KIT FRONT WHEELS WITH 13 INCH ROTORS
COBRA KIT WITH 13 INCH ROTORS
Click Here For CALIPER KITS FRONT WHEEL ONLY COBRA TWO PISTON
6 PISTON CALIPERS FRONT WHEELS WITH 13 INCH ROTORS
Back to Top
  NOTE; CLICK TO FAR RIGHT FRONT WHEELS WITH 13 INCH ROTORS 1994-2004
6 PISTON CALIPERS WITH 13 INCH ROTORS
Click Here For CALIPER KITS FRONT WHEEL ONLY SIX PISTON CALIPERS
1994-2004 4 PISTON brembo CALIPERS FRONT WHEELS WITH 13 INCH ROTORS
Back to Top
  NOTE; CLICK TO FAR RIGHT FRONT WHEELS WITH 13 INCH ROTORS 1994-2004
4 PISTON CALIPERS WITH 13 INCH ROTORS 1994-2004
Click Here For CALIPER KITS FRONT WHEEL ONLY FOUR PISTON CALIPERS
6 PISTON CALIPERS FRONT WHEELS WITH 14 INCH ROTORS
Back to Top
  NOTE; CLICK TO FAR RIGHT FRONT WHEELS WITH 14 INCH ROTORS 1994-2004
6 PISTON CALIPERS WITH 14 INCH ROTORS
Click Here For CALIPER KITS FRONT WHEEL ONLY SIX PISTON CALIPERS
for 5 lug 1987-1993 spindles 6 PISTON WILWOOD CALIPERS FRONT WHEELS WITH 13 INCH ROTORS
Back to Top
  NOTE; CLICK TO FAR RIGHT FRONT WHEELS WITH 13 INCH ROTORS
6 PISTON CALIPERS WITH 13 INCH ROTORS
Click Here For CALIPER KITS FRONT WHEEL ONLY 6 PISTON CALIPERS
for 5 lug 1987-1993 spindles 6 PISTON WILWOOD CALIPERS FRONT WHEELS WITH 12 INCH ROTORS
Back to Top
  NOTE; CLICK TO FAR RIGHT FRONT WHEELS WITH 12 INCH ROTORS
6 PISTON CALIPERS WITH 12 INCH ROTORS
Click Here For CALIPER KITS FRONT WHEEL ONLY 6 PISTON CALIPERS
for 5 lug 1987-1993 spindles 4 PISTON WILWOOD CALIPERS FRONT WHEELS WITH 10.5 INCH ROTORS FOR 15 INCH WHEELS
Back to Top
  NOTE; CLICK TO FAR RIGHT FRONT WHEELS WITH 10.5 INCH ROTORS
4 PISTON CALIPERS WITH 10.5 INCH ROTORS
Click Here For CALIPER KITS FRONT WHEEL ONLY 4 PISTON CALIPERS
for 1994-2004 spindles 4 PISTON WILWOOD CALIPERS FRONT WHEELS WITH 11 3/4 INCH ROTORS FOR 15 INCH WHEELS
Back to Top
  NOTE; CLICK TO FAR RIGHT FRONT WHEELS WITH 11 3/4 INCH ROTORS
4 PISTON CALIPERS WITH 11 3/4 INCH ROTORS
Click Here For CALIPER KITS FRONT WHEEL ONLY 4 PISTON CALIPERS
4 PISTON WILWOOD CALIPERS REAR WHEELS WITH STRAIGHT REAR END AND 15 INCH WHEELS
Back to Top
  CLICK TO FAR RIGHT REAR STRAIGHT REAR END 12 INCH ROTORS FOR 15 INCH WHEELS
4 PISTON CALIPERS WITH 12 INCH ROTORS
Click Here For CALIPER KITS REAR WHEEL ONLY 4 PISTON CALIPERS
4 PISTON WILWOOD CALIPERS REAR WHEELS WITH STRAIGHT REAR END AND 13 INCH ROTORS FOR 17 INCH WHEELS
Back to Top
  CLICK TO FAR RIGHT REAR STRAIGHT REAR END 13 INCH ROTORS FOR 17 INCH WHEELS
4 PISTON CALIPERS WITH 13 INCH ROTORS
Click Here For CALIPER KITS REAR WHEEL ONLY 4 PISTON CALIPERS
COMPLETE KITS FRONT AND REARS WITH TWO PISTON CALIPERS (FOR 15 INCH WHEELS)
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR PBR TWO PISTON CALIPER KIT WITH 11 INCH FRONT AND 10.5 INCH REARS (FOR 15 INCH WHEELS)
COMPLETE KITS FRONT AND REARS (FOR 15 INCH WHEELS)
Click Here For COMPLETE KITS FRONT AND REARS
COMPLETE COBRA KITS FRONT AND REARS (FOR 17 INCH WHEELS)
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR COBRA KIT WITH 13 INCH FRONT AND 11.65 INCH REARS
COMPLETE KITS FRONT AND REARS (FOR 17 INCH WHEELS)
Click Here For COMPLETE KITS FRONT AND REARS
COMPLETE COBRA KITS FRONT AND GT REARS 10.5 INCH REAR ROTORS (FOR 17 INCH WHEELS)
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR COBRA KIT WITH 13 INCH FRONT AND 10.5 INCH REARS
COMPLETE KITS FRONT AND REARS YOU DO NOT NEED TO TAKE THE AXLES OUT WITH THIS KIT (FOR 17 INCH WHEELS)
Click Here For COMPLETE KITS FRONT AND REARS
CALIPERS ONLY REAR WHEEL T-BIRD
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR CALIPERS ONLY REAR WHEEL T-BIRD
CALIPERS ONLY REAR WHEEL T-BIRD
Click Here For CALIPERS ONLY REAR WHEEL T-BIRD
CALIPERS ONLY COBRA REAR WHEEL FOR 11.65 INCH ROTORS
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR CALIPERS ONLY COBRA REAR WHEEL FOR 11.65 INCH ROTORS
CALIPERS ONLY COBRA REAR WHEEL FOR 11.65 INCH ROTORS
Click Here For CALIPERS ONLY COBRA REAR WHEEL FOR 11.65 INCH ROTORS
CALIPER KITS REAR WHEEL WITH BIG 13 INCH ROTORS
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR CALIPER KITS REAR WHEEL WITH 13 INCH ROTORS
CALIPER KITS REAR WHEEL WITH BIG 13 INCH ROTORS
Click Here For CALIPER KITS REAR WHEEL WITH 13 INCH ROTORS
COBRA CALIPER KITS REAR WHEEL WITH 11.65 INCH ROTORS
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR COBRA CALIPER KITS REAR WHEEL WITH 11.65 INCH ROTORS
COBRA CALIPER KITS REAR WHEEL WITH 11.65 INCH ROTORS
Click Here For COBRA CALIPER KITS REAR WHEEL WITH 11.65 INCH ROTORS
IRS 13 INCH REAR ROTOR KIT
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR BIG IRS 13 inch REAR KIT
IRS 13 inch REAR KIT
Click Here For IRS big 13 inch REAR KIT
IRS COBRA REAR KIT with 11.65 inch Rotors
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR IRS COBRA REAR KIT
IRS COBRA REAR KIT
Click Here For IRS COBRA REAR KIT
4 PISTON WILWOOD CALIPERS REAR WHEELS WITH STRAIGHT REAR END AND 15 INCH WHEELS
Back to Top
  CLICK TO FAR RIGHT REAR STRAIGHT REAR END 12 INCH ROTORS FOR 15 INCH WHEELS
4 PISTON CALIPERS WITH 12 INCH ROTORS
Click Here For CALIPER KITS REAR WHEEL ONLY 4 PISTON CALIPERS
Gear Oil
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR Gear Oil
Synthetic Oil
Click Here For Gear Oil
oil Gage s/s Lines
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR oil Gage s/s Lines
oil,vacuum,fuel Gage s/s Lines
Click Here For oil Gage s/s Lines
DISC BRAKE PADS MADE BY HAWK
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR DISC BRAKE PADS MADE BY AIMCO
DISC BRAKE PADS MADE BY HAWK
Click Here For DISC BRAKE PADS MADE BY HAWK
DISC BRAKE PADS MADE BY CARBOTECH
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR DISC BRAKE PADS MADE BY CARBOTECH
DISC BRAKE PADS MADE BY CARBOTECH
Click Here For DISC BRAKE PADS MADE BY CARBOTECH
E-BRAKE CABLES
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR E-BRAKE CABLES
E-BRAKE CABLES
Click Here For E-BRAKE CABLES
E-BRAKE CABLE (adjustable ebrake Y cable and non adjustable brake Y cable)
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR E-BRAKE Y CABLE
E-BRAKE Y CABLE
Click Here For E-BRAKE Y CABLE
E-BRAKE HANDLE
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR E-BRAKE HANDLE
E-BRAKE HANDLE
Click Here For E-BRAKE HANDLE
E-BRAKE COMPLETE KIT
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR E-BRAKE KIT
E-BRAKE COMPLETE KIT
Click Here For E-BRAKE KIT
IRS BRACKETS AND 8.8 STRAIGHT REAR ENDS
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR CALIPER BRACKETS FOR IRS AND 8.8 STRAIGHT REAR ENDS
IRS BRACKETS AND 4LUG AND 5LUG
Click Here For IRS REAR BRACKETS AND 5LUG AND 4LUG
ADJUSTABLE PROPORTIONING VALVE
Back to Top
  NOTE; ADJUSTABLE PROPORTIONING VALVE
ADJUSTABLE PROPORTIONING VALVE
Click Here For PROPORTIONING VALVE
SN-95 and up SPINDLES
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR SN-95 and up
SN-95 and up FRONT SPINDLES
Click Here For SN 95 and up SPINDLES
1987-1993 SPINDLES
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR 1987-1993
1987-1993 FRONT SPINDLES
Click Here For 1987-1993 SPINDLES
SPINDLE NUT KIT
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR SPINDLE NUT KIT
OEM FORD PARTS
Click Here For SPINDLE NUT KIT
FRONT WHEEL BEARINGS
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR WHEEL BEARINGS
WHEEL BEARINGS
Click Here For WHEEL BEARINGS
REAR BEARING KIT with 8.8 live axle
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR REAR BEARING KIT
WITH SEALS
Click Here For REAR BEARING KIT
REAR BEARING KIT FOR 8.8 IRS CENTER SECTION
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR REAR BEARING KIT
FOR 8.8 IRS CENTER SECTION
Click Here For REAR BEARING KIT
REAR WHEEL BEARINGS FOR 8.8 IRS REAR END
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR REAR WHEEL BEARINGS
FOR 8.8 IRS REAR END
Click Here For REAR WHEEL BEARINGS
SN-95 SPINDLES (CAPS)
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR SN-95 CAPS
SN-95 FRONT (CAPS)
Click Here For SN 95 (CAPS)
1987-1993 (CAPS) FOR SPINDLES
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR CAPS
1987-1993 FRONT (CAPS)
Click Here For 1987-1993 (CAPS)
SN-95 and up SPINDLES (CAPS AND BEARINGS)
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR SN-95 and up CAPS AND BEARINGS
SN-95 and up FRONT (CAPS AND BEARINGS)
Click Here For SN 95 and up (CAPS AND BEARINGS)
IRS HUBS WITH 4 1/2 INCH BOLT CIRCLE
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR IRS REAR HUBS
IRS REAR HUBS
Click Here For IRS REAR HUBS
IRS HUBS WITH 4 1/2 INCH BOLT CIRCLE WITH ROTORS
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR IRS REAR HUBS AND ROTORS
IRS REAR HUBS AND ROTORS
Click Here For IRS REAR HUBS AND ROTORS
IRS TBIRD KNUCKLES
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR IRS REAR KNUCKLES
IRS REAR KNUCKLES
Click Here For IRS KNUCKLES
IRS TBIRD CV AXLES
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR IRS REAR CV AXLES
IRS REAR AXLES
Click Here For IRS CV AXLES
HARDWARE FOR 8.8 IRS REAR END
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR HARDWARE FOR 8.8 IRS REAR END
IRS REAR END HARDWARE
Click Here For IRS 8.8 REAR END HARDWARE
8.8 IRS COMPLETE REAR END
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR IRS 8.8 REAR END
IRS REAR END
Click Here 1987-1996 IRS rear end
8.8 Straight Rear end Chrome Cover
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR 8.8 REAR END CHROME COVER
8.8 straight Rear End
Click Here For CHROME 8.8 REAR END COVER
8.8 Support Cover
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR 8.8 REAR END SUPPORT COVER
8.8 straight Rear End
Click Here For ALUMINUM 8.8 REAR END COVER
8.8 STRAIGHT REAR END FOR 28 TOOTH AXLES
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR 8.8 STRAIGHT REAR END for 28 tooth axles
8.8 straight Rear End
Click Here 1979-1996 8.8 Straight rear end
8.8 STRAIGHT REAR END FOR PIN DRIVE
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR 8.8 STRAIGHT REAR END for pin drive
8.8 straight Rear End
Click Here For 8.8 straight rear end for pin drive
8.8 STRAIGHT REAR END VENT FITTING
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR 8.8 STRAIGHT REAR END VENT FITTING
VENT FITTING for 8.8 straight Rear End
Click Here For 8.8 STRAIGHT AXLE REAR END (VENT FITTING)
Gear Oil
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR Gear Oil
Synthetic Oil
Click Here For Gear Oil
S/S BRAKE LINES
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR S/S BRAKE LINES
S/S BRAKE LINES
Click Here For S/S BRAKE LINES
S/S POP RIVETS AND GUN
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR POP Rivet Kit
S/S pop Rivets
Click Here For S/S Pop Rivets and gun
S/S BRAKE LINES WITH AN3 ENDS
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR AN3 TYPE ENDS ON S/S BRAKE LINES
NEW NEW NEW
Click Here For S/S BRAKE LINES WITH AN3 ENDS
SPEED BLEEDERS
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR SPEED BLEEDERS
SPEED BLEEDERS
Click Here For SPEED BLEEDERS
THREAD SETTER KIT
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR THREAD SETTER
THREAD SETTER KIT
Click Here For Thread Setter Kit
WHEEL SPACERS
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR FRONT WHEEL SPACERS
WHEEL SPACERS
Click Here For WHEEL SPACERS
WHEEL STUDS AND INSTALLER TOOL
Back to Top
  NOTE; CLICK TO FAR RIGHT FOR FRONT WHEEL STUDS
WHEEL STUDS
Click Here For WHEEL STUDS
REAR BEARING KIT 1987-2004 with 8.8 live axle
Back to Top
Item Description
Price
 
1987-2004 8.8 INCH REAR END
Price$59.95
  1987-2004 REAR BEARING KIT with 8.8 live axle (REAR Wheels)
note: WITH SEALS
REAR BEARING KIT 1987-2004 FOR 8.8 CENTER SECTION
Back to Top
Item Description
Price
 
1987-2004 8.8 INCH REAR END
Price$59.95
  1987-2004 REAR BEARING KIT FOR 8.8 CENTER SECTION (REAR Wheels)
note: WITH SEALS
REAR WHEEL BEARINGS 1987-1997 FOR 8.8 IRS
Back to Top
Item Description
Price
 
1987-1997 8.8 REAR END
Price$120.95
  1987-1997 REAR WHEEL BEARINGS FOR 8.8 rear end (REAR Wheels)
COBRA CAPS FOR THE SN95 SPINDLES
Back to Top
Item Description
Price
 
NEW TWO CAPS
Price$14.95
  1994-2003 NEW FROM FORD CAPS FOR THE 1994-2004 SPINDLE (Front Wheels)
note: if you have banged up caps and would like them to look good then we have new ones from Ford
MUSTANG FRONT CAPS FOR THE 1987-1993 SPINDLES
Back to Top
Item Description
Price
 
NEW TWO CAPS
Price$14.95
  MUSTANG FRONT CAPS FOR THE 1987-1993 SPINDLES (Front Wheels)
note: if you have banged up caps and would like them to look good then we have new ones from Ford
COBRA CAPS AND BEARINGS FOR THE SN95 SPINDLES
Back to Top
Item Description
Price
 
NEW BEARS AND NEW CAPS FROM FORD
Price$199.95
  1994-2003 sn95 NEW FROM FORD TWO BEARING assemblies AND WITH NEW CAPS FOR THE 1994-2004 SPINDLE (Front Wheels)
note: if you have sn95 spindles and need new bearings then this is for you
HUBS FOR IRS REAR END WITH 4 1/2 INCH BOLT CIRCLE
Back to Top
Item Description
Price
 
NEW HUB AND STUDS FROM FORD
Price$480.95
  1994-2003 NEW FROM FORD TWO HUB assemblies AND WITH NEW STUDS FOR T-BIRD REARS (REAR Wheels)
note: 4 1/2 INCH BOLT CIRCLE
1989-1992 NEW FROM FORD TWO KNUCKLE assemblies AND WITH NEW BEARINGS
Back to Top
Item Description
Price
 
NEW FROM FORD A LEFT AND RIGHT KNUCKLE
Price$995.95
  1989-1992 NEW FROM FORD TBIRD KNUCKLE assemblies AND WITH NEW BEARINGS (REAR Wheels)
note: OEM TBIRD Knuckles 1989-1992
1989-1997 NEW TWO CV AXLES FOR FF COBRA WITH IRS REAR END WITH STANDARD DRIVE AXLES
Back to Top
Item Description
Price
 
NOTE: WE NEED TO KNOW IF PIN DRIVE OR STD AXLES
Price$549.95 note:these are performance axles and are twice as strong as oem tbird ends
  1989-1997 NEW TWO CV AXLE assemblies ALL NEW WITH 1 5/16 INCH AXLES (REAR Wheels)
note: FOR FF COBRA IRS REARS 1989-1997 CV AXLES
$549.95 one set of axles
1989-1997 Ford Tbird IRS CV joint end assemblie kit
Back to Top
Item Description
Price
 
Price$499.95
  1989-1997 Ford Tbird IRS CV joint end assemblie kit (REAR Wheels)
$499.95 axle assemblie kit
BRAKE LINE CLIPS
Back to Top
Item Description
Price
 
Price$3.95
  4 Brake line clips
brake hose clips
BOOT AND SEAL KIT
Back to Top
Item Description
Price
 
Price$14.95
 COBRA 1999-2004 PBR CALIPERS 40MM BORE BOOT AND SEAL KIT (cobra 40MM 4-seals and 4 boots)
OEM BOOT AND SEALS
BOOT AND SEAL KIT
Back to Top
Item Description
Price
 
Price$14.95
 COBRA 1994-1998 PBR CALIPERS 38MM BORE BOOT AND SEAL KIT (cobra 38MM 4-seals and 4 boots)
OEM BOOT AND SEALS
BOOT AND SEAL KIT
Back to Top
Item Description
Price
 
Price$14.95
 MUSTANG AND GT 1999-2004 PBR TWO PISTON CALIPERS 45MM BOOT AND SEAL KIT (MUSTANG 45MM 4-seals and 4 boots)
OEM BOOT AND SEALS
BOOT AND SEAL KIT REAR WHEELS
Back to Top
Item Description
Price
 
Price$14.95
 MUSTANG AND GT 1994-2004 REAR CALIPERS BOOT AND SEAL KIT (MUSTANG 2-seals and 2 boots)
OEM BOOT AND SEALS REAR WHEELS
REAR WHEELS
BRAKE FITTINGS
Back to Top
Item Description
Price
  NOTE;1-3/16 FEMALE-T AND 3-3/16 TUBING FITTINGS
BRAKE FITTINGS FOR 3/16 TUBING, THREAD SIZE 3/8X24
Price$9.95
  ADAPTER FITTING
ADAPTER FITTING 1-3/16 FEMALE-T AND 3-3/16 TUBING FITTINGS
BRAKE FITTINGS
Back to Top
Item Description
Price
  NOTE; (3/16 (3/8 24 thread FEMALE) TO 7/16 INCH MALE inverted flare
BRAKE FITTING 3/16 FEMALE TO 7/16 MALE
Price$4.95
  ADAPTER FITTING
ADAPTER FITTING 3/16 INCH FEMALE TO 7/16 INCH MALE
BRAKE FITTINGS
Back to Top
Item Description
Price
  NOTE; (7/16 x 24 thread female) TO 3/16 INCH MALE for inverted flare
BRAKE FITTING 3/16 FEMALE TO 7/16 MALE
Price$4.95
  ADAPTER FITTING (7/16 x 24 thread female) TO 3/16 INCH MALE for inverted flare
ADAPTER FITTING 3/16 INCH FEMALE TO 7/16 INCH MALE
BRAKE FITTINGS
Back to Top
Item Description
Price
  NOTE; 3/16 X 3/16 TUBE NUT
BRAKE FITTING 3/16 X 3/16
Price$1.95
  TUBING NUT FITTING
FITTING 3/16 X 3/16 TUBE NUT
BRAKE FITTINGS
Back to Top
Item Description
Price
  NOTE; 3/16 X 7/16 TUBE NUT
BRAKE FITTING 3/16 X 7/16
Price$2.95
  TUBING NUT FITTING
FITTING 3/16 X 7/16 TUBE NUT
BRAKE FITTINGS
Back to Top
Item Description
Price
  NOTE; FITTING 3/16 X 12MM x1.0 and 3/16 x 10MMX1.0 for Aluminum Master Cylinder
Price$10.95 for two fittings
  FITTING 3/16 X 12MM x1.0 and 3/16 x 10MMX1.0 to convert Bubble Female in master Cylinder to bubble flare for steel lines for Aluminum Master Cylinder
if you have a Cobra Aluminum Master Cylinder then you need these fittings to put your steel lines in the master Cylinder
click on picture for more info
BRAKE FITTINGS
Back to Top
Item Description
Price
  NOTE; FITTING 3/16 X 12MM x1.0 for Aluminum Master Cylinder
BRAKE FITTING 3/16 X 7/16
Price$5.95
  FITTING 3/16 X 12MM x1.0 to convert Bubble Female in master Cylinder to bubble Flare for steel lines for Aluminum Master Cylinder
FITTING 3/16 X 12MM x1.0 for Aluminum Master Cylinder
BRAKE FITTINGS
Back to Top
Item Description
Price
  NOTE; FITTING 3/16 X 10MM x1.0 for Aluminum Master Cylinder
BRAKE FITTING 3/16 X 7/16
Price$5.95
  FITTING 3/16 X 10MM x1.0 to convert Bubble Female in master Cylinder to bubble Flare for steel lines for Aluminum Master Cylinder
FITTING 3/16 X 10MM x1.0 for Aluminum Master Cylinder
BRAKE FITTINGS
Back to Top
Item Description
Price
  NOTE; 3/16 FEMALE IS 3/16 THREAD AND 3/16 THREAD
BRAKE FITTING 7/16 FEMALE TO 3/16 MALE
Price$5.95
  ADAPTER FITTING 3/16 X 3/16 CONNECTOR FEMALE
ADAPTER FITTING 3/16 X 3/16 CONNECTOR FEMALE
BRAKE FLUID
Back to Top
Item Description
Price
  WILWOOD DOT-4 IS THE HIGHIST RATING OF ALL BRAKE FLUIDS
1-12 FLUID OUNCE OF BRAKE FLUID
Price$8.95
  ALL CARS AND TRUCKS ALL Years (DOT-4 BRAKE FLUID) (Front or Rear Wheels AND CLUTCHES)
LOW MOISTURE ANTI-VAPOR LOCK
BRAKE FLUID
Back to Top
Item Description
Price
  WILWOOD DOT-4 IS THE HIGHIST RATING OF ALL BRAKE FLUIDS
2-12 FLUID OUNCE OF BRAKE FLUID
Price$14.95
  ALL CARS AND TRUCKS ALL Years (DOT-4 BRAKE FLUID) (Front or Rear Wheels AND CLUTCHES)
LOW MOISTURE ANTI-VAPOR LOCK
SPEED BLEEDER KIT FRONT or REAR 1994-2004 COBRA AND 1999-2004 GT
Back to Top
Item Description
Price
Order
  NOTE: BLEEDERS ARE SOLD IN SETS OF 2 ONLY BLEEDING YOUR BRAKES COULD NOT BE BETTER THEN THIS, WITH SPEED BLEEDER 10 MM X 1.0 BLEEDER SIZE THREAD
  FORD MUSTANG 1994-2004 AND GT 1999-2004 SPEED BLEEDER KIT FOR FRONT or REAR WHEELS Note: fits all Rear calipers tbird or mustang (Set OF TWO SB1010) (BLEEDER KIT)
$12.95
BANJO BOLT KIT COBRA 2003-2004 FOR FRONT CALIPERS
Back to Top
Item Description
Price
Order
  NOTE:BANJO BOLTS ARE SOLD IN SETS OF 2 ONLY FORD ORIGINAL EQUIPMENT BANJO BOLTS AND WASHERS TWO FRONT 10 MM X 1.5 BOLTS AND 4 WASHERS
  FORD BANJO BOLT KIT COBRA 2003-2004 FOR FRONT CALIPERS AND 4 HEAT TREATED WASHERS (Set OF TWO) (BOLT KIT) FRONT WHEELS Torque spec 25 inch LB
$14.95
BANJO BOLT KIT 1994-02 COBRA AND 1999-04 GT FRONT AND REAR
Back to Top
Item Description
Price
Order
  NOTE:BANJO BOLTS ARE SOLD IN SETS OF 4 ONLY FORD ORIGINAL EQUIPMENT BANJO BOLTS AND WASHERS TWO FRONT 10 MM X 1 BOLTS AND TWO REAR 10 MM X 1.5 BOLTS AND 8 WASHERS
$12.95
  FORD COBRA 1994-02 AND GT 1999-04 BANJO BOLT KIT TWO FRONT BOLTS AND TWO REAR BOLTS AND 8 HEAT TREATED WASHERS (Set OF FOUR) (BOLT KIT) FRONT AND REAR WHEELS Torque spec 25 inch LB
$24.95
BANJO BOLT KIT 1994-02 COBRA AND 1999-04 GT FRONT WHEEL
Back to Top
Item Description
Price
Order
  NOTE:BANJO BOLTS ARE SOLD IN SETS OF 2 ONLY FORD ORIGINAL EQUIPMENT BANJO BOLTS AND WASHERS TWO FRONT 10 MM X 1 BOLTS AND 4 WASHERS
  FORD COBRA 1994-02 AND GT 1999-04 BANJO BOLT KIT TWO FRONT BOLTS 4 HEAT TREATED WASHERS 10x1 (Set OF TWO) (BOLT KIT) FRONT WHEELS Torque spec 25 inch LB
$16.95
BANJO BOLT KIT 1994-04 COBRA AND 1999-04 GT REAR WHEEL
Back to Top
Item Description
Price
Order
  NOTE:BANJO BOLTS ARE SOLD IN SETS OF 2 ONLY FORD ORIGINAL EQUIPMENT BANJO BOLTS AND WASHERS TWO REAR 10 MM X 1.5 BOLTS AND 4 WASHERS
  FORD COBRA 1994-04 AND GT 1999-04 BANJO BOLT KIT 4 HEAT TREATED WASHERS (Set of two banjo bolts) REAR WHEELS Torque spec 25 inch LB
$14.95
COBRA & GT CALIPER MOUNTING BOLT KIT 1994-2004 FRONT WHEELS
Back to Top
Item Description
Price
Order
  NOTE:GRADE 10.9 BOLTS ARE SOLD IN SETS OF 4 ONLY FORD COBRA BOLTS AND WASHERS BOLTS ARE TO MOUNT THE CALIPER BRACKETS TO THE SPINDLE
  FORD COBRA & GT 1994-2004 MOUNTING BOLT KIT TO MOUNT THE CALIPER BRACKET TO THE SPINDLE FOR FRONT WHEELS 4 HEAT TREATED AND HARDEN WASHERS (Set OF FOUR) (BOLT KIT) FRONT WHEELS
$19.95
COBRA & GT CALIPER MOUNTING BOLT KIT 1994-2004 REAR WHEELS
Back to Top
Item Description
Price
Order
  NOTE:GRADE 10.9 BOLTS ARE SOLD IN SETS OF 4 ONLY FORD COBRA BOLTS AND WASHERS REAR WHEELS BOLTS ARE TO MOUNT THE CALIPER BRACKETS TO THE AXLE BRACKET
  FORD COBRA & GT 1994-2004 MOUNTING BOLT KIT TO MOUNT THE CALIPER BRACKET TO THE AXLE BRACKET REAR WHEELS 4 HEAT TREATED AND HARDEN WASHERS (Set OF FOUR) (BOLT KIT) REAR WHEELS
$19.95
SN95 SPINDLE MOUNTING BOLT KIT 1994-2004 FRONT WHEELS
Back to Top
Item Description
Price
Order
  NOTE:GRADE 10.9 BOLTS ARE SOLD IN SETS OF 4 ONLY 4 BOLTS 4 WASHERS AND 4 NUTS BOLTS ARE TO MOUNT THE SN 95 SPINDLES
  SN95 SPINDLE MOUNTING BOLT KIT 1994-2004 FRONT WHEELS 4 HEAT TREATED AND HARDEN WASHERS (Set OF FOUR) (BOLT KIT) FRONT WHEELS
$36.95
BOOT AND SEAL KIT
Back to Top
Item Description
Price
 
Price$14.95
 COBRA 1999-2004 PBR CALIPERS 40MM BORE BOOT AND SEAL KIT (cobra 40MM 4-seals and 4 boots)
OEM BOOT AND SEALS
BOOT AND SEAL KIT
Back to Top
Item Description
Price
 
Price$14.95
 COBRA 1994-1998 PBR CALIPERS 38MM BORE BOOT AND SEAL KIT (cobra 38MM 4-seals and 4 boots)
OEM BOOT AND SEALS
BOOT AND SEAL KIT
Back to Top
Item Description
Price
 
Price$14.95
 MUSTANG AND GT 1999-2004 PBR TWO PISTON CALIPERS 45MM BOOT AND SEAL KIT (MUSTANG 45MM 4-seals and 4 boots)
OEM BOOT AND SEALS
CALIPER HARDWARE FOR 1994-2004 COBRA MUSTANG TWO PISTON PBR CALIPERS
Back to Top
Item Description
Price
Order
  NOTE: 2 CALIPER PINS FOUR AINTI RATTLE CLIPS NEW OEM PINS
  FORD PBR TWO PISTON CALIPERS 1994-2004 TWO OEM PINS FOUR ANTI RATTLE CLIPS TWO WASHERS AND TWO C-CLIPS (Front wheel calipers)
$39.95
CALIPER HARDWARE FOR 1994-2004 COBRA AND MUSTANG GT REAR WHEEL CALIPERS
Back to Top
Item Description
Price
Order
  NOTE: REAR WHEEL HARDWARE FOUR PAD CLIPS AND ANTI RATTLE BRACKET ALL STAINLESS STEEL COBRA AND GT
  FOR 1994-2004 COBRA OR GT FOUR PAD CLIPS AND TWO ANTI RATTLE BRACKETS ALL STAINLESS STEEL (Rear wheel calipers)
$19.95
CALIPER HARDWARE FOR 1994-2004 COBRA AND MUSTANG GT REAR WHEEL CALIPERS
Back to Top
Item Description
Price
Order
  NOTE: REAR WHEEL HARDWARE FOUR PINS WITH BOLTS AND FOUR BOOTS COBRA AND GT
  FOR 1994-2004 COBRA OR GT FOUR PINS AND BOOTS (Rear wheel calipers)
$29.95
REAR BEARING KIT 1987-1993
Back to Top
Item Description
Price
 
1987-1993 8.8 INCH REAR END
Price$59.95
  1987-1993 REAR BEARING KIT (REAR Wheels)
note: WITH SEALS
BRAKE BLEEDER REPAIR KIT
Back to Top
Item Description
Price
  NOTE;Remember always clean up Brake fluid with soap and water only
Price$9.95
  THIS KIT IS 1/4 INCH PIPE. SIZE HOLE TO DRILL 29/64 .453 THEN TAP WITH 1/4 INCH PIPE TAP
BLEEDER SCREW REPAIR KIT
BRAKE BLEEDER REPAIR KIT
Back to Top
Item Description
Price
  NOTE;Remember always clean up Brake fluid with soap and water only
Price$9.95
  THIS KIT IS 1/8 INCH PIPE. SIZE HOLE TO DRILL 5/16 .312 THEN TAP WITH 1/8 INCH PIPE TAP
BLEEDER SCREW REPAIR KIT
1994-2004 COBRA OR MUSTANG & GT CALIPER BLEEDER SCREWS AND WASHERS FOR FRONT AND REAR WHEEL CALIPERS
Back to Top
Item Description
Price
Order
  NOTE: FRONT AND REAR WHEEL BLEEDER SCREWS TWO FRONT BLEEDER SCREWS AND TWO REAR BLEEDER SCREWS 8 COPPER WASHERS
  FOR 1994-2004 COBRA OR MUSTANG & GT TWO 10MM X 1.0 FRONT BLEEDER SCREWS AND TWO 10MM X 1.0 REAR BLEEDER SCREWS (FRONT AND REAR wheel calipers)
$12.95
1987-1993 CALIPER BLEEDER SCREWS AND WASHERS FOR FRONT AND REAR WHEEL CALIPERS
Back to Top
Item Description
Price
Order
  NOTE: FRONT AND REAR WHEEL BLEEDER SCREWS TWO FRONT BLEEDER SCREWS AND TWO REAR BLEEDER SCREWS 8 COPPER WASHERS
  FOR 1987-1993 MUSTANG TWO 3/8 X 24 FRONT BLEEDER SCREWS AND TWO 10MM X 1.0 REAR BLEEDER SCREWS (FRONT AND REAR wheel calipers)
$12.95
SPEED BLEEDER KIT FRONT or REAR 1994-2004 COBRA AND 1999-2004 GT
Back to Top
Item Description
Price
Order
  NOTE: BLEEDERS ARE SOLD IN SETS OF 2 ONLY BLEEDING YOUR BRAKES COULD NOT BE BETTER THEN THIS, WITH SPEED BLEEDER 10 MM X 1.0 BLEEDER SIZE THREAD
  FORD MUSTANG 1994-2004 AND GT 1999-2004 SPEED BLEEDER KIT FOR FRONT or REAR WHEELS (Set OF TWO SB1010) (BLEEDER KIT)
$12.95
ADJUSTABLE PROPORTIONING VALVE
Back to Top
Item Description
Price
Order
  ADJUSTABLE PROPORTIONING VALVE MOUNTING HOLE DIAMETER .250 HOLE SPACING 1.00 INCH ADJUSTABLE PROPORTIONING VALVE
$59.95
  MAX PRESSURE REDUCTION 57% INLET/OUTLET PORTS 1/8-27 NPT
$59.95
FRONT WHEEL SPACERS 1994-2004 MUSTANG WITH 17 INCH WHEELS
Back to Top
Item Description
Price
Order
  NOTE: YOU MUST USE 17 INCH WHEELS FOR THESE SPACERS 7/32 INCH SPACERS FOR FORD MUSTANG FRONT SPINDLES 1994-2004 TWO WHEEL SPACERS 7/32 INCH AND TEN WHEEL STUDS 2 1/4 INCH LONG
 
$59.95
IRS REAR END and KNUCKLE MOUNTING HARDWARE
Back to Top
Item Description
Price
 
10 MOUNTING BOLTS AND LOCKING NUTS
Price$49.95
  Ford T-BIRD 1989-1997 8.8 IRS REAR END 10 MOUNTING BOLTS for mounting the knuckles and housing
note: nuts are self locking
IRS REAR END HOUSING MOUNTING HARDWARE
Back to Top
Item Description
Price
 
4 MOUNTING BOLTS AND LOCKING NUTS
Price$24.95
  Ford T-BIRD 1989-1997 8.8 IRS REAR END 4 MOUNTING BOLTS for mounting the HOUSING
note: nuts are self locking
IRS REAR END MOUNTING BUSHINGS
Back to Top
Item Description
Price
 
note: bushings go in the 8.8 housing next to the drive shaft flange
Price$59.95
  Ford T-BIRD 1989-1997 8.8 IRS REAR END MOUNTING BUSHING
4 BUSHINGS
IRS REAR END MOUNTING NUTS OR FRONT SN95 SPINDLE NUTS
Back to Top
Item Description
Price
 
note: nuts go on the axle ends by the knuckles or on the front sn95 spindles
Price$24.95
  Ford T-BIRD 1989-1997 8.8 IRS REAR END 2 MOUNTING NUTS FOR AXLE ENDS OR FOR FRONT SN95 SPINDLES
2 NUTS
New for pin drive 8.8 straight rear end shorten to 54 1/4 flange to flange with 31 tooth axles and all gear truetrac posi
Back to Top
Item Description
Price
 1979-1998 8.8 straight axle for pin drive and ford 9 inch bearing ends and moser 31 tooth axles
Shortend for pin drive
Price$1995.95
  Ford Mustang 1979-1998 8.8 straight axle with 31 tooth axles and truetrac all gear posi rear powder coated gloss black 8.8 straight axle shortend for pin drive
powder coated gloss black
8.8 straight axle VENT FITTING
Back to Top
Item Description
Price
 1979-1998 8.8 straight axle VENT FITTING
New from Ford Vent Fitting
Price$19.95
  Ford Mustang 1979-1998 8.8 straight axle Vent Fitting
New Vent
8.8 straight axle REAR END SUPPORT COVER
Back to Top
Item Description
Price
 If you are going to do any Hi perfromance racing then you will need a support cover
Ford Motor Sport Product
Price$217.95
  Ford Mustang 1979-2004 8.8 straight axle Cover with bolts and gasket)
note: support bolts for posi bearings
COVER FOR 8.8 straight axle REAR END
Back to Top
Item Description
Price
 High gloss Chrome and grade 8 bolts
Price$45.95
  Ford Mustang 1986-2004 8.8 straight axle (Chrome Cover with bolts)
Makes your Rear look good
DRILL KIT
Back to Top
Item Description
Price
  NOTE; most ff cobra builders use the wrong drill bits when doing the sheet metal work these bits are made for sheet metal work
Professional drill bits
5 bits Price$9.95
  Sheel metal twist drill bits 1/8 inch x 2 inch short extremely sturdy drills are effective for sideways stress rather than point wear
DRILL KIT
AXLE SPACERS
Back to Top
Item Description
Price
  Spacer for the Fox xales
axle spacers
Price$25.95
  This is for the Fox axles if you are using the 1994-2004 mustang GT rotor or the cobra rotor
THREAD SETTER KIT
Back to Top
Item Description
Price
Order
  JUST DRILL A HOLE AND PUT IN A THREAD SETTER
  pro thread setter kit includes assortment of SAE poly nuts nosepieces and mandrels QUICK AND SIMPLE WAY TO PUT THREADS IN METAL OR PLASTIC
 
$99.95
list price $129.95 special price $99.95
Royal Purple 75W140 Synthetic
Back to Top
Item Description
Price
Order
 Royal Purple 75W140 Synthetic For differentials and manual transmissions max-gear outperforms other GL-5 gear oils because it combines the highest quality synthetic oils and that makes gears run smoother,quieter,cooler and longer.
Per Quart $19.99
 
   About Us  |  Terms Of Service  |  Privacy Policy

Site Created, Maintained, and Hosted by discbrakesrus.com
781 447 6652 ©2000