|
Hardware - Boot & seals
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR REAR AXLES SPACERS |
AXLES SPACERS |
|
Click Here 1979-1994 Fox axles SPACERS
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR BANJO BOLTS |
BANJO BOLTS |
Click Here For banjo bolts
|
|
(BOLTS) CALIPER MOUNTING BOLTS FRONT WHEELS
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR (BOLTS FRONT) CALIPER FRONT WHEEL MOUNTING BOLTS |
MOUNTING BOLTS FRONT CALIPERS |
Click Here For Caliper front wheel mounting bolts
|
|
(BOLTS REAR) CALIPER MOUNTING BOLTS REAR WHEELS
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR (BOLTS) CALIPER REAR WHEEL MOUNTING BOLTS |
CALIPER REAR WHEEL MOUNTING BOLTS |
|
Click Here For Rear Wheel Caliper mounting Bolts
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR BUMP STEER KIT |
BUMP STEER KIT |
Click Here For BUMP STEER KIT
|
|
(BOLTS) SN95 SPINDLE MOUNTING BOLTS FRONT WHEELS
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR (SN95 SPINDLE BOLTS FRONT) |
MOUNTING BOLTS FRONT SPINDLES |
Click Here For SN95 SPINDLE BOLT KIT
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR Brake line clips |
Brake line mounting clips for s/s or rubber lines |
Click Here For Brake line clips
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR Brake line brackets |
Brake line mounting brackets for brake lines |
Click Here For BRAKE LINE BRACKETS
|
|
|
|
Back to Top |
|
|
|
|
|
OEM FORD MUSTANG BRAKE LIGHT SWITCH |
BRAKE LIGHT SWITCH |
Click Here For BRAKE LIGHT SWITCH
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR S/S BRAKE LINES |
S/S BRAKE LINES |
Click Here For S/S BRAKE LINES
|
|
Brake Caliper brackets Front Mustang Cobra
|
Back to Top |
|
|
|
|
|
Caliper bracket for PBR Cobra two piston Fronts |
1994-2004 |
Click Here For Caliper Brackets Front
|
|
REAR BRACKETS 8.8 STRAIGHT REAR ENDS AND IRS REAR ENDS
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR CALIPER BRACKETS FOR IRS AND 8.8 STRAIGHT REAR ENDS |
IRS BRACKETS AND 4LUG AND 5LUG |
Click Here For IRS REAR BRACKETS AND 5LUG AND 4LUG
|
|
|
|
Back to Top |
|
|
|
|
|
Battery Box sits flat in trunk |
Aluminum Battery Box |
Click Here For Battery Box
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR HD CABLE & FORK KIT |
HD CABLE & FORK KIT |
Click Here For HD CABLE & FORK KIT
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR Fork Extension |
Fork Extension for steel bell housing |
Click Here For Fork Extension
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR DRILL BITS |
DRILL BITS |
Click Here For Drill Bits
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR Boot and seals |
Boot and seals |
Click Here For Boot and seals
|
|
Brake Bleeder screw and bleeder repair kits
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR Brake Bleeders |
Brake Bleeders and Bleeder repair kits |
Click Here For Brake Bleeders
|
|
CALIPER HARDWARE FRONT AND REAR WHEELS
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR FRONT AND REAR WHEEL HARDWARE |
BRAKE HARDWARE |
Click Here For Brake Hardware
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR BRAKE FITTINGS |
BRAKE FITTINGS |
Click Here For Brake FITTINGS
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR BRAKE FLUID |
BRAKE FLUID |
Click Here For Brake Fluid
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR DUST SHIELDS OR SPLASH GUARDS |
DUST SHIELDS |
Click Here For DUST SHIELDS OR SPLASH GUARDS
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR BRAKE TOOLS |
BRAKE TOOLS |
Click Here For BRAKE TOOLS
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR Aluminum Drive shaft |
Aluminum Drive shaft |
Click Here For Aluminum Drive shaft
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR Gear Oil |
Synthetic Oil |
Click Here For Gear Oil
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR oil Gage s/s Lines |
oil,vacuum,fuel Gage s/s Lines |
Click Here For oil Gage s/s Lines
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR E-BRAKE CABLES |
E-BRAKE CABLES |
Click Here For E-BRAKE CABLES
|
|
E-BRAKE CABLE (adjustable ebrake Y cable and non adjustable brake Y cable)
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR E-BRAKE Y CABLE |
E-BRAKE Y CABLE |
Click Here For E-BRAKE Y CABLE
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR E-BRAKE HANDLE |
E-BRAKE HANDLE |
Click Here For E-BRAKE HANDLE
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR E-BRAKE KIT |
E-BRAKE COMPLETE KIT |
|
Click Here For E-BRAKE KIT
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR GAS PEDAL KIT |
FFR MK III Gas Pedal |
Click Here For GAS PEDAL
|
|
IRS BRACKETS AND 8.8 STRAIGHT REAR ENDS
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR CALIPER BRACKETS FOR IRS AND 8.8 STRAIGHT REAR ENDS |
IRS BRACKETS AND 4LUG AND 5LUG |
|
Click Here For IRS REAR BRACKETS AND 5LUG AND 4LUG
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR MASTER CYLINDERS |
MASTER CYLINDERS |
Click Here For MASTER CYLINDERS
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR CLUTCH KIT |
Clutch Quadrant |
Click Here For Clutch adjustment kit
|
|
ADJUSTABLE ROD FOR MASTER Cylinder
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR ADJUSTABLE ROD FOR MASTER Cylinder |
ADJUSTABLE ROD |
Click Here For ADJUSTABLE ROD FOR MASTER Cylinder
|
|
|
|
Back to Top |
|
|
|
|
|
OEM FORD MUSTANG BRAKE LIGHT SWITCH |
BRAKE LIGHT SWITCH |
|
Click Here For BRAKE LIGHT SWITCH
|
|
ADJUSTABLE PROPORTIONING VALVE
|
Back to Top |
|
|
|
|
|
NOTE; ADJUSTABLE PROPORTIONING VALVE |
ADJUSTABLE PROPORTIONING VALVE |
Click Here For PROPORTIONING VALVE
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR SPINDLE NUT KIT |
OEM FORD PARTS |
Click Here For SPINDLE NUT KIT
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR WHEEL BEARINGS |
|
WHEEL BEARINGS
Click Here For WHEEL BEARINGS
|
|
REAR BEARING KIT with 8.8 live axle
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR REAR BEARING KIT |
WITH SEALS |
Click Here For REAR BEARING KIT
|
|
REAR BEARING KIT FOR 8.8 IRS CENTER SECTION
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR REAR BEARING KIT |
FOR 8.8 IRS CENTER SECTION |
|
Click Here For REAR BEARING KIT
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR SN-95 CAPS |
SN-95 FRONT (CAPS) |
Click Here For SN 95 (CAPS)
|
|
1987-1993 (CAPS) FOR SPINDLES
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR CAPS |
1987-1993 FRONT (CAPS) |
|
Click Here For 1987-1993 (CAPS)
|
|
SN-95 and up SPINDLES (CAPS AND BEARINGS)
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR SN-95 and up CAPS AND BEARINGS |
SN-95 and up FRONT (CAPS AND BEARINGS) |
Click Here For SN 95 and up (CAPS AND BEARINGS)
|
|
IRS HUBS WITH 4 1/2 INCH BOLT CIRCLE
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR IRS REAR HUBS |
IRS REAR HUBS |
Click Here For IRS REAR HUBS
|
|
IRS HUBS WITH 4 1/2 INCH BOLT CIRCLE WITH ROTORS
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR IRS REAR HUBS AND ROTORS |
IRS REAR HUBS AND ROTORS |
Click Here For IRS REAR HUBS AND ROTORS
|
|
HARDWARE FOR 8.8 IRS REAR END
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR HARDWARE FOR 8.8 IRS REAR END |
IRS REAR END HARDWARE |
Click Here For IRS 8.8 REAR END HARDWARE
|
|
8.8 Straight Rear end Chrome Cover
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR 8.8 REAR END CHROME COVER |
8.8 straight Rear End |
Click Here For CHROME 8.8 REAR END COVER
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR 8.8 REAR END SUPPORT COVER |
8.8 straight Rear End |
Click Here For ALUMINUM 8.8 REAR END COVER
|
|
8.8 STRAIGHT REAR END VENT FITTING
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR 8.8 STRAIGHT REAR END VENT FITTING |
VENT FITTING for 8.8 straight Rear End |
Click Here For 8.8 STRAIGHT AXLE REAR END (VENT FITTING)
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR Gear Oil |
Synthetic Oil |
|
Click Here For Gear Oil
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR Pedal Box |
Pedal Box |
Click Here For Pedal Box
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR SPEED BLEEDERS |
|
SPEED BLEEDERS
Click Here For SPEED BLEEDERS
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR THREAD SETTER |
|
THREAD SETTER KIT
Click Here For Thread Setter Kit
|
|
|
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR FRONT WHEEL SPACERS |
|
WHEEL SPACERS
Click Here For WHEEL SPACERS
|
|
WHEEL STUDS AND INSTALLER TOOL
|
Back to Top |
|
|
|
|
|
NOTE; CLICK TO FAR RIGHT FOR FRONT WHEEL STUDS |
|
WHEEL STUDS
Click Here For WHEEL STUDS
|
|
Spindle nut kit 1987-1993
|
Back to Top |
| Item Description |
|
Price |
|
|
NEW FROM FORD |
Price$39.95
|
|
|
|
1987-1993 SPINDLE NUT KIT WITH HEAT TREATED WASHERS (Front Wheels) |
note: OEM FORD PARTS |
|
|
Spindle nuts kit Front wheels 1994-2004
|
Back to Top |
| Item Description |
|
Price |
|
|
|
NEW FROM FORD |
Price$24.95
|
|
|
|
1994-2004 SPINDLE NUTS note: socket size is 36MM (Front Wheels) |
note: OEM FORD PARTS |
|
|
Spindle nut kit rear IRS t-bird 1989-1997
|
Back to Top |
| Item Description |
|
Price |
|
|
|
NEW FROM FORD |
Price$24.95
|
|
|
|
1989-1997 SPINDLE NUTS note: socket size is 36MM (Rear Wheels if IRS Rear end) rear IRS t-bird 1989-1997 |
note: OEM FORD PARTS |
|
|
REAR BEARING KIT 1987-2004 with 8.8 live axle
|
Back to Top |
| Item Description |
|
Price |
|
|
|
1987-2004 8.8 INCH REAR END |
Price$59.95
|
|
|
|
1987-2004 REAR BEARING KIT with 8.8 live axle (REAR Wheels) |
note: WITH SEALS |
|
|
REAR BEARING KIT 1987-2004 FOR 8.8 CENTER SECTION
|
Back to Top |
| Item Description |
|
Price |
|
|
|
1987-2004 8.8 INCH REAR END |
Price$59.95
|
|
|
|
1987-2004 REAR BEARING KIT FOR 8.8 CENTER SECTION (REAR Wheels) |
note: WITH SEALS |
|
|
COBRA CAPS FOR THE SN95 SPINDLES
|
Back to Top |
| Item Description |
|
Price |
|
|
|
NEW TWO CAPS |
Price$14.95
|
|
|
|
1994-2003 NEW FROM FORD CAPS FOR THE 1994-2004 SPINDLE (Front Wheels) |
note: if you have banged up caps and would like them to look good then we have new ones from Ford |
|
|
MUSTANG FRONT CAPS FOR THE 1987-1993 SPINDLES
|
Back to Top |
| Item Description |
|
Price |
|
|
|
NEW TWO CAPS |
Price$14.95
|
|
|
|
MUSTANG FRONT CAPS FOR THE 1987-1993 SPINDLES (Front Wheels) |
note: if you have banged up caps and would like them to look good then we have new ones from Ford |
|
|
COBRA CAPS AND BEARINGS FOR THE SN95 SPINDLES
|
Back to Top |
| Item Description |
|
Price |
|
|
|
NEW BEARS AND NEW CAPS FROM FORD |
Price$199.95
|
|
|
|
1994-2003 sn95 NEW FROM FORD TWO BEARING assemblies AND WITH NEW CAPS FOR THE 1994-2004 SPINDLE (Front Wheels) |
note: if you have sn95 spindles and need new bearings then this is for you |
|
|
HUBS FOR IRS REAR END WITH 4 1/2 INCH BOLT CIRCLE
|
Back to Top |
| Item Description |
|
Price |
|
|
|
NEW HUB AND STUDS FROM FORD |
Price$219.95
|
|
|
|
1994-2003 NEW FROM FORD TWO HUB assemblies AND WITH NEW STUDS FOR T-BIRD REARS (REAR Wheels) |
note: 4 1/2 INCH BOLT CIRCLE |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
|
Price$3.95
|
|
|
4 Brake line clips |
brake hose clips |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
|
|
Price$14.95
|
|
|
|
COBRA 1999-2004 PBR CALIPERS 40MM BORE BOOT AND SEAL KIT (cobra 40MM 4-seals and 4 boots) |
OEM BOOT AND SEALS |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
|
|
Price$14.95
|
|
|
|
COBRA 1994-1998 PBR CALIPERS 38MM BORE BOOT AND SEAL KIT (cobra 38MM 4-seals and 4 boots) |
OEM BOOT AND SEALS |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
|
|
Price$14.95
|
|
|
|
MUSTANG AND GT 1999-2004 PBR TWO PISTON CALIPERS 45MM BOOT AND SEAL KIT (MUSTANG 45MM 4-seals and 4 boots) |
OEM BOOT AND SEALS |
|
|
BOOT AND SEAL KIT REAR WHEELS
|
Back to Top |
| Item Description |
|
Price |
|
|
|
|
Price$14.95
|
|
|
|
MUSTANG AND GT 1994-2004 REAR CALIPERS BOOT AND SEAL KIT (MUSTANG 2-seals and 2 boots) |
OEM BOOT AND SEALS REAR WHEELS |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE;1-3/16 FEMALE-T AND 3-3/16 TUBING FITTINGS
|
BRAKE FITTINGS FOR 3/16 TUBING, THREAD SIZE 3/8X24 |
Price$9.95
|
|
|
ADAPTER FITTING |
ADAPTER FITTING 1-3/16 FEMALE-T AND 3-3/16 TUBING FITTINGS |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; (3/16 (3/8 24 thread FEMALE) TO 7/16 INCH MALE inverted flare
|
BRAKE FITTING 3/16 FEMALE TO 7/16 MALE |
Price$4.95
|
|
|
|
ADAPTER FITTING |
ADAPTER FITTING 3/16 INCH FEMALE TO 7/16 INCH MALE |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; (7/16 x 24 thread female) TO 3/16 INCH MALE for inverted flare
|
BRAKE FITTING 3/16 FEMALE TO 7/16 MALE |
Price$4.95
|
|
|
|
ADAPTER FITTING (7/16 x 24 thread female) TO 3/16 INCH MALE for inverted flare |
ADAPTER FITTING 3/16 INCH FEMALE TO 7/16 INCH MALE |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; 3/16 X 3/16 TUBE NUT
|
BRAKE FITTING 3/16 X 3/16 |
Price$1.95
|
|
|
|
TUBING NUT FITTING |
FITTING 3/16 X 3/16 TUBE NUT |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; 3/16 X 7/16 TUBE NUT
|
BRAKE FITTING 3/16 X 7/16 |
Price$2.95
|
|
|
|
TUBING NUT FITTING |
FITTING 3/16 X 7/16 TUBE NUT |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; FITTING 3/16 X 12MM x1.0 and 3/16 x 10MMX1.0 for Aluminum Master Cylinder |
|
Price$10.95 for two fittings
|
|
|
FITTING 3/16 X 12MM x1.0 and 3/16 x 10MMX1.0 to convert Bubble Female in master Cylinder to bubble flare for steel lines for Aluminum Master Cylinder |
if you have a Cobra Aluminum Master Cylinder then you need these fittings to put your steel lines in the master Cylinder |
click on picture for more info
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; FITTING 3/16 X 12MM x1.0 for Aluminum Master Cylinder |
BRAKE FITTING 3/16 X 7/16 |
Price$5.95
|
|
|
|
FITTING 3/16 X 12MM x1.0 to convert Bubble Female in master Cylinder to bubble Flare for steel lines for Aluminum Master Cylinder |
FITTING 3/16 X 12MM x1.0 for Aluminum Master Cylinder |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; FITTING 3/16 X 10MM x1.0 for Aluminum Master Cylinder |
BRAKE FITTING 3/16 X 7/16 |
Price$5.95
|
|
|
|
FITTING 3/16 X 10MM x1.0 to convert Bubble Female in master Cylinder to bubble Flare for steel lines for Aluminum Master Cylinder |
FITTING 3/16 X 10MM x1.0 for Aluminum Master Cylinder |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; 3/16 FEMALE IS 3/16 THREAD AND 3/16 THREAD
|
BRAKE FITTING 7/16 FEMALE TO 3/16 MALE |
Price$5.95
|
|
|
|
ADAPTER FITTING 3/16 X 3/16 CONNECTOR FEMALE |
ADAPTER FITTING 3/16 X 3/16 CONNECTOR FEMALE |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
WILWOOD DOT-4 IS THE HIGHIST RATING OF ALL BRAKE FLUIDS
|
1-12 FLUID OUNCE OF BRAKE FLUID |
Price$8.95
|
|
|
|
ALL CARS AND TRUCKS ALL Years (DOT-4 BRAKE FLUID) (Front or Rear Wheels AND CLUTCHES) |
LOW MOISTURE ANTI-VAPOR LOCK |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
WILWOOD DOT-4 IS THE HIGHIST RATING OF ALL BRAKE FLUIDS
|
2-12 FLUID OUNCE OF BRAKE FLUID |
Price$14.95
|
|
|
|
ALL CARS AND TRUCKS ALL Years (DOT-4 BRAKE FLUID) (Front or Rear Wheels AND CLUTCHES) |
LOW MOISTURE ANTI-VAPOR LOCK |
|
|
SPEED BLEEDER KIT FRONT or REAR 1994-2004 COBRA AND 1999-2004 GT
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE: BLEEDERS ARE SOLD IN SETS OF 2 ONLY |
BLEEDING YOUR BRAKES COULD NOT BE BETTER THEN THIS, WITH SPEED BLEEDER |
10 MM X 1.0 BLEEDER SIZE THREAD
|
|
|
|
FORD MUSTANG 1994-2004 AND GT 1999-2004 SPEED BLEEDER KIT FOR FRONT or REAR WHEELS Note: fits all Rear calipers tbird or mustang (Set OF TWO SB1010) (BLEEDER KIT) |
|
$12.95
|
|
BANJO BOLT KIT COBRA 2003-2004 FOR FRONT CALIPERS
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE:BANJO BOLTS ARE SOLD IN SETS OF 2 ONLY |
FORD ORIGINAL EQUIPMENT BANJO BOLTS AND WASHERS |
TWO FRONT 10 MM X 1.5 BOLTS AND 4 WASHERS
|
|
|
FORD BANJO BOLT KIT COBRA 2003-2004 FOR FRONT CALIPERS AND 4 HEAT TREATED WASHERS (Set OF TWO) (BOLT KIT) FRONT WHEELS |
Torque spec 25 inch LB
|
$14.95
|
|
BANJO BOLT KIT 1994-02 COBRA AND 1999-04 GT FRONT AND REAR
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE:BANJO BOLTS ARE SOLD IN SETS OF 4 ONLY |
FORD ORIGINAL EQUIPMENT BANJO BOLTS AND WASHERS |
TWO FRONT 10 MM X 1 BOLTS AND TWO REAR 10 MM X 1.5 BOLTS AND 8 WASHERS
|
$12.95
|
|
|
FORD COBRA 1994-02 AND GT 1999-04 BANJO BOLT KIT TWO FRONT BOLTS AND TWO REAR BOLTS AND 8 HEAT TREATED WASHERS (Set OF FOUR) (BOLT KIT) FRONT AND REAR WHEELS |
Torque spec 25 inch LB
|
$24.95
|
|
BANJO BOLT KIT 1994-02 COBRA AND 1999-04 GT FRONT WHEEL
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE:BANJO BOLTS ARE SOLD IN SETS OF 2 ONLY |
FORD ORIGINAL EQUIPMENT BANJO BOLTS AND WASHERS |
TWO FRONT 10 MM X 1 BOLTS AND 4 WASHERS
|
|
|
FORD COBRA 1994-02 AND GT 1999-04 BANJO BOLT KIT TWO FRONT BOLTS 4 HEAT TREATED WASHERS 10x1 (Set OF TWO) (BOLT KIT) FRONT WHEELS |
Torque spec 25 inch LB
|
$16.95
|
|
BANJO BOLT KIT 1994-04 COBRA AND 1999-04 GT REAR WHEEL
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE:BANJO BOLTS ARE SOLD IN SETS OF 2 ONLY |
FORD ORIGINAL EQUIPMENT BANJO BOLTS AND WASHERS |
TWO REAR 10 MM X 1.5 BOLTS AND 4 WASHERS
|
|
|
|
FORD COBRA 1994-04 AND GT 1999-04 BANJO BOLT KIT 4 HEAT TREATED WASHERS (Set of two banjo bolts) REAR WHEELS |
Torque spec 25 inch LB
|
$14.95
|
|
COBRA & GT CALIPER MOUNTING BOLT KIT 1994-2004 FRONT WHEELS
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE:GRADE 10.9 BOLTS ARE SOLD IN SETS OF 4 ONLY |
FORD COBRA BOLTS AND WASHERS |
BOLTS ARE TO MOUNT THE CALIPER BRACKETS TO THE SPINDLE
|
|
|
|
FORD COBRA & GT 1994-2004 MOUNTING BOLT KIT TO MOUNT THE CALIPER BRACKET TO THE SPINDLE FOR FRONT WHEELS 4 HEAT TREATED AND HARDEN WASHERS (Set OF FOUR) (BOLT KIT) FRONT WHEELS |
|
$19.95
|
|
COBRA & GT CALIPER MOUNTING BOLT KIT 1994-2004 REAR WHEELS
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE:GRADE 10.9 BOLTS ARE SOLD IN SETS OF 4 ONLY |
FORD COBRA BOLTS AND WASHERS REAR WHEELS |
BOLTS ARE TO MOUNT THE CALIPER BRACKETS TO THE AXLE BRACKET
|
|
|
|
FORD COBRA & GT 1994-2004 MOUNTING BOLT KIT TO MOUNT THE CALIPER BRACKET TO THE AXLE BRACKET REAR WHEELS 4 HEAT TREATED AND HARDEN WASHERS (Set OF FOUR) (BOLT KIT) REAR WHEELS |
|
$19.95
|
|
SN95 SPINDLE MOUNTING BOLT KIT 1994-2004 FRONT WHEELS
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE:GRADE 10.9 BOLTS ARE SOLD IN SETS OF 4 ONLY |
4 BOLTS 4 WASHERS AND 4 NUTS |
BOLTS ARE TO MOUNT THE SN 95 SPINDLES
|
|
|
|
SN95 SPINDLE MOUNTING BOLT KIT 1994-2004 FRONT WHEELS 4 HEAT TREATED AND HARDEN WASHERS (Set OF FOUR) (BOLT KIT) FRONT WHEELS |
|
$36.95
|
|
STAINLESS STEEL BUSHINGS FOR 1987-1993 MUSTANG CALIPERS
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE: 4 S/S BUSHINGS |
FACTORY FIVE OR MUSTANG THIS WILL IMPROVE YOUR BRAKEING |
BETTER BRAKEING WITH S/S BUSHINGS
|
|
|
|
FORD MUSTANG 1987-1993 four s/s bushings (Front wheel calipers two per caliper) |
|
$39.95
|
|
RUBBER BUSHINGS FOR 1987-1993 MUSTANG CALIPERS
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE: 4 RUBBER BUSHINGS |
MUSTANG 1987-1993 FRONT WHEEL OEM RUBBER BUSHINGS |
IF YOU JUST NEED OEM RUBBER BUSHINGS
|
|
|
FORD MUSTANG 1987-1993 Four Rubber bushings (Front wheel calipers two per caliper) |
|
$12.95
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
|
|
Price$14.95
|
|
|
|
COBRA 1999-2004 PBR CALIPERS 40MM BORE BOOT AND SEAL KIT (cobra 40MM 4-seals and 4 boots) |
OEM BOOT AND SEALS |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
|
|
Price$14.95
|
|
|
|
COBRA 1994-1998 PBR CALIPERS 38MM BORE BOOT AND SEAL KIT (cobra 38MM 4-seals and 4 boots) |
OEM BOOT AND SEALS |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
|
|
Price$14.95
|
|
|
|
MUSTANG AND GT 1999-2004 PBR TWO PISTON CALIPERS 45MM BOOT AND SEAL KIT (MUSTANG 45MM 4-seals and 4 boots) |
OEM BOOT AND SEALS |
|
|
CALIPER BOLTS FOR 1987-1993 MUSTANG CALIPERS
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE: 4 CALIPER BOLTS |
BOLTS ARE PLATED AND HAVE ANTI LOCK ON THREADS |
NEW OEM BOLTS
|
|
|
FORD MUSTANG 1987-1993 Four OEM Bolts (Front wheel calipers two per caliper) |
|
$39.95
|
|
CALIPER HARDWARE FOR 1994-2004 COBRA MUSTANG TWO PISTON PBR CALIPERS
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE: 2 CALIPER PINS |
FOUR AINTI RATTLE CLIPS |
NEW OEM PINS
|
|
|
FORD PBR TWO PISTON CALIPERS 1994-2004 TWO OEM PINS FOUR ANTI RATTLE CLIPS TWO WASHERS AND TWO C-CLIPS (Front wheel calipers) |
|
$39.95
|
|
CALIPER HARDWARE FOR 1994-2004 COBRA AND MUSTANG GT REAR WHEEL CALIPERS
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE: REAR WHEEL HARDWARE |
FOUR PAD CLIPS AND ANTI RATTLE BRACKET ALL STAINLESS STEEL |
COBRA AND GT
|
|
|
FOR 1994-2004 COBRA OR GT FOUR PAD CLIPS AND TWO ANTI RATTLE BRACKETS ALL STAINLESS STEEL (Rear wheel calipers) |
|
$19.95
|
|
CALIPER HARDWARE FOR 1994-2004 COBRA AND MUSTANG GT REAR WHEEL CALIPERS
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE: REAR WHEEL HARDWARE |
FOUR PINS WITH BOLTS AND FOUR BOOTS |
COBRA AND GT
|
|
|
FOR 1994-2004 COBRA OR GT FOUR PINS AND BOOTS (Rear wheel calipers) |
|
$29.95
|
|
Spindle nut kit 1987-1993
|
Back to Top |
| Item Description |
|
Price |
|
|
|
NEW FROM FORD |
Price$14.95
|
|
|
|
1987-1993 SPINDLE NUT KIT WITH HEAT TREATED WASHERS (Front Wheels) |
note: OEM FORD PARTS |
|
|
FRONT WHEEL BEARINGS AND SEALS (FRONT WHEELS) 1987-1993 MUSTANG
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE: BEARINGS ONLY: RACES NOT INCLUDED BECAUSE THEY COME INSTALLED WITH THE ROTORS |
|
|
|
|
BEARINGS FOR FORD MUSTANG FRONT SPINDLES 1987-1993 TWO INNER AND TWO OUTER WHEEL BEARINGS AND TWO GREASE SEALS |
|
$59.95
|
|
REAR BEARING KIT 1987-1993
|
Back to Top |
| Item Description |
|
Price |
|
|
|
1987-1993 8.8 INCH REAR END |
Price$59.95
|
|
|
|
1987-1993 REAR BEARING KIT (REAR Wheels) |
note: WITH SEALS |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE;Remember always clean up Brake fluid with soap and water only
|
|
Price$9.95
|
|
|
THIS KIT IS 1/4 INCH PIPE. SIZE HOLE TO DRILL 29/64 .453 THEN TAP WITH 1/4 INCH PIPE TAP |
BLEEDER SCREW REPAIR KIT |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE;Remember always clean up Brake fluid with soap and water only
|
|
Price$9.95
|
|
|
|
THIS KIT IS 1/8 INCH PIPE. SIZE HOLE TO DRILL 5/16 .312 THEN TAP WITH 1/8 INCH PIPE TAP |
BLEEDER SCREW REPAIR KIT |
|
|
1994-2004 COBRA OR MUSTANG & GT CALIPER BLEEDER SCREWS AND WASHERS FOR FRONT AND REAR WHEEL CALIPERS
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE: FRONT AND REAR WHEEL BLEEDER SCREWS |
TWO FRONT BLEEDER SCREWS AND TWO REAR BLEEDER SCREWS |
8 COPPER WASHERS
|
|
|
|
FOR 1994-2004 COBRA OR MUSTANG & GT TWO 10MM X 1.0 FRONT BLEEDER SCREWS AND TWO 10MM X 1.0 REAR BLEEDER SCREWS (FRONT AND REAR wheel calipers) |
|
$12.95
|
|
1987-1993 CALIPER BLEEDER SCREWS AND WASHERS FOR FRONT AND REAR WHEEL CALIPERS
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE: FRONT AND REAR WHEEL BLEEDER SCREWS |
TWO FRONT BLEEDER SCREWS AND TWO REAR BLEEDER SCREWS |
8 COPPER WASHERS
|
|
|
|
FOR 1987-1993 MUSTANG TWO 3/8 X 24 FRONT BLEEDER SCREWS AND TWO 10MM X 1.0 REAR BLEEDER SCREWS (FRONT AND REAR wheel calipers) |
|
$12.95
|
|
SPEED BLEEDER KIT FRONT or REAR 1994-2004 COBRA AND 1999-2004 GT
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE: BLEEDERS ARE SOLD IN SETS OF 2 ONLY |
BLEEDING YOUR BRAKES COULD NOT BE BETTER THEN THIS, WITH SPEED BLEEDER |
10 MM X 1.0 BLEEDER SIZE THREAD
|
|
|
|
FORD MUSTANG 1994-2004 AND GT 1999-2004 SPEED BLEEDER KIT FOR FRONT or REAR WHEELS (Set OF TWO SB1010) (BLEEDER KIT) |
|
$12.95
|
|
ADJUSTABLE ROD FOR master CYLINDER
|
Back to Top |
| Item Description |
|
Price |
Order |
|
ADJUSTABLE ROD FOR master CYLINDER |
|
|
|
|
|
ADJUSTABLE ROD FOR master CYLINDER |
|
$49.95
|
|
ADJUSTABLE PROPORTIONING VALVE
|
Back to Top |
| Item Description |
|
Price |
Order |
|
ADJUSTABLE PROPORTIONING VALVE |
MOUNTING HOLE DIAMETER .250 HOLE SPACING 1.00 INCH |
ADJUSTABLE PROPORTIONING VALVE
|
$59.95
|
|
|
MAX PRESSURE REDUCTION 57% INLET/OUTLET PORTS 1/8-27 NPT |
|
$59.95
|
|
FRONT WHEEL SPACERS 1994-2004 MUSTANG WITH 17 INCH WHEELS
|
Back to Top |
| Item Description |
|
Price |
Order |
|
NOTE: YOU MUST USE 17 INCH WHEELS FOR THESE SPACERS 7/32 INCH SPACERS FOR FORD MUSTANG FRONT SPINDLES 1994-2004 TWO WHEEL SPACERS 7/32 INCH AND TEN WHEEL STUDS 2 1/4 INCH LONG |
|
|
|
|
|
|
|
$59.95
|
|
IRS REAR END and KNUCKLE MOUNTING HARDWARE
|
Back to Top |
| Item Description |
|
Price |
|
|
|
10 MOUNTING BOLTS AND LOCKING NUTS |
Price$49.95
|
|
|
|
Ford T-BIRD 1989-1997 8.8 IRS REAR END 10 MOUNTING BOLTS for mounting the knuckles and housing
| note: nuts are self locking |
|
|
IRS REAR END HOUSING MOUNTING HARDWARE
|
Back to Top |
| Item Description |
|
Price |
|
|
|
4 MOUNTING BOLTS AND LOCKING NUTS |
Price$24.95
|
|
|
|
Ford T-BIRD 1989-1997 8.8 IRS REAR END 4 MOUNTING BOLTS for mounting the HOUSING
| note: nuts are self locking |
|
|
IRS REAR END MOUNTING BUSHINGS
|
Back to Top |
| Item Description |
|
Price |
|
|
|
note: bushings go in the 8.8 housing next to the drive shaft flange |
Price$59.95
|
|
|
|
Ford T-BIRD 1989-1997 8.8 IRS REAR END MOUNTING BUSHING
| 4 BUSHINGS |
|
|
IRS REAR END MOUNTING NUTS OR FRONT SN95 SPINDLE NUTS
|
Back to Top |
| Item Description |
|
Price |
|
|
|
note: nuts go on the axle ends by the knuckles or on the front sn95 spindles |
Price$24.95
|
|
|
|
Ford T-BIRD 1989-1997 8.8 IRS REAR END 2 MOUNTING NUTS FOR AXLE ENDS OR FOR FRONT SN95 SPINDLES
| 2 NUTS |
|
|
8.8 straight axle VENT FITTING
|
Back to Top |
| Item Description |
|
Price |
|
|
1979-1998 8.8 straight axle VENT FITTING
|
New from Ford Vent Fitting |
Price$19.95
|
|
|
|
Ford Mustang 1979-1998 8.8 straight axle Vent Fitting
| New Vent |
|
|
8.8 straight axle REAR END SUPPORT COVER
|
Back to Top |
| Item Description |
|
Price |
|
|
If you are going to do any Hi perfromance racing then you will need a support cover
|
Ford Motor Sport Product |
Price$195.95
|
|
|
|
Ford Mustang 1979-2004 8.8 straight axle Cover with bolts and gasket)
| note: support bolts for posi bearings |
|
|
COVER FOR 8.8 straight axle REAR END
|
Back to Top |
| Item Description |
|
Price |
|
|
High gloss Chrome and grade 8 bolts
|
|
Price$45.95
|
|
|
|
Ford Mustang 1986-2004 8.8 straight axle (Chrome Cover with bolts)
| Makes your Rear look good |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
NOTE; most ff cobra builders use the wrong drill bits when doing the sheet metal work these bits are made for sheet metal work
|
Professional drill bits |
5 bits Price$9.95
|
|
|
|
Sheel metal twist drill bits 1/8 inch x 2 inch short extremely sturdy drills are effective for sideways stress rather than point wear |
DRILL KIT |
|
|
Cable Fork Kit for mark 111 Cobra
|
Back to Top |
| Item Description |
|
Price |
|
|
Cable Fork Kit for mark 111 Cobra
|
|
Price$69.95
|
|
|
|
|
Cable and Fork |
|
|
|
|
Back to Top |
| Item Description |
Price |
|
Order |
|
86-93 Mustang Clutch Fork Extension For Mcleod & Lakewood Bell housings IF you have a steel bell housing for racing then you will need an extension
|
$29.99 for racing |
|
|
FFR MkIII Roadster Custom Aluminum Driveshaft for Tremec TKO
|
Back to Top |
| Item Description |
|
Price |
|
|
FFR MkIII Roadster Custom Aluminum Driveshaft for Tremec TKO
|
|
Price$338.96
|
|
|
|
|
Aluminum Drive Shaft |
|
|
FFR MkIII Roadster Custom Aluminum Driveshaft for T-5 and Tremec 3550
|
Back to Top |
| Item Description |
|
Price |
|
|
FFR MkIII Roadster Custom Aluminum Driveshaft for T-5 and Tremec 3550
|
|
Price$338.96
|
|
|
|
|
Aluminum Drive Shaft |
|
|
FFR MkIII Coupe Custom Aluminum Driveshaft for Tremec TKO
|
Back to Top |
| Item Description |
|
Price |
|
|
FFR MkIII Coupe Custom Aluminum Driveshaft for Tremec TKO
|
|
Price$338.96
|
|
|
|
|
Aluminum Drive Shaft |
|
|
FFR Coupe Custom Aluminum Driveshaft for T-5 and Tremec 3550
|
Back to Top |
| Item Description |
|
Price |
|
|
FFR Coupe Custom Aluminum Driveshaft for T-5 and Tremec 3550
|
|
Price$338.96
|
|
|
|
|
Aluminum Drive Shaft |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
OEM Ford Mustang brake light switch
|
BRAKE LIGHT SWITCH |
Price$14.95
|
|
|
|
BRAKE LIGHT SWITCH |
TWO WIRE SWITCH |
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
Ford Motor Sport clutch adjustment and Quadrant
|
Double Hook Quadrant |
Price$119.95
|
|
|
|
This is for the mustang pedal box |
|
|
|
|
|
Back to Top |
| Item Description |
|
Price |
|
|
Spacer for the Fox xales
|
axle spacers |
Price$25.95
|
|
|
|
This is for the Fox axles if you are using the 1994-2004 mustang GT rotor or the cobra rotor |
|
|
|
|
|
Back to Top |
| Item Description |
|
Price |
Order |
|
JUST DRILL A HOLE AND PUT IN A THREAD SETTER
|
|
|
|
|
pro thread setter kit includes assortment of SAE poly nuts nosepieces and mandrels |
QUICK AND SIMPLE WAY TO PUT THREADS IN METAL OR PLASTIC |
|
|
|
|
|
|
$99.95
|
|
|
|
Back to Top |
| Item Description |
|
Price |
Order |
|
|
|
|
BUMP STEERING KIT |
Bump-steer is a change in toe angle caused by the suspension moving up or down. Bump-steer is built into the geometry of the suspension and steering system, and has nothing to do with turning the steering wheel |
|
|
|
|
The effect of bump-steer is for the wheel to toe-in or toe-out when the suspension moves up or down. This toe change or “steering” occurs any time the suspension moves, whether it is from body roll, brake-dive, or hitting a bump in the road. Bump steer is undesirable because the suspension is steering the car instead of the driver. |
|
$139.95
|
|
|
|
Back to Top |
| Item Description |
|
Price |
Order |
|
|
|
|
|
Pedal box For FF Cobra |
|
|
|
|
Pedal box For FF Cobra |
|
$225.96
|
|
|
|
Back to Top |
| Item Description |
|
Price |
Order |
|
|
|
|
|
GAS PEDAL |
|
|
|
|
GAS PEDAL FOR MARK 111 |
|
$99.96
|
|
|
|
Back to Top |
| Item Description |
Price |
|
Order |
|
Aluminum Battery Box this box sits flat in the bottom of the trunk. You will lose no trunk space with this set up (click on pictures for more info)
|
$139.99 |
|
|
Royal Purple 75W140 Synthetic
|
Back to Top |
| Item Description |
Price |
|
Order |
|
Royal Purple 75W140 Synthetic For differentials and manual transmissions max-gear outperforms other GL-5 gear oils because it combines the highest quality synthetic oils and that makes gears run smoother,quieter,cooler and longer.
|
Per Quart $12.99 |
|
|
| |
| | |
Note: Page takes a loooong time to load, lots of pictures
